The AQ10 is a two-way passive loudspeaker designed to provide high sound pressure levels from a compact, architecturally friendly, heavily braced vented enclosure. It features a 10" (250mm) long-throw, direct radiating bass driver with a 2.5" (63mm) voice coil and a 1" (25mm) exit compression driver with a 1.4" (35mm) diaphragm, coupled to a true constant directivity HF horn.
More information...

The AQ112 is a direct radiating sub-bass in an ultra-compact heavily braced vented enclosure. It features a very efficient 12" (300mm) long-throw bass driver with a high power 3" (75mm) voice coil and generously sized low frequency ports for low noise, high power operation.
The AQ112’s ultra-compact size makes it an ideal partner for AQ Series full-range loudspeakers where space is at a premium or where the sub enclosure needs to be hidden.
More information...

The AQ12 is a two-way passive loudspeaker designed to provide high sound pressure levels from an architecturally friendly, heavily braced vented enclosure. It features a 12" (300mm) long-throw, direct radiating bass driver with a 2.5" (63mm) voice coil and a 1" (25mm) exit compression driver with a 1.7" (43mm) diaphragm, coupled to a true constant directivity HF horn.
More information...

The AQ210 is a dual driver, direct radiating sub-bass in an ultra-compact heavily braced vented enclosure. It features two very efficient 10" (250mm) long-throw bass drivers with high power 3" (75mm) voice coils and generously sized low frequency ports for low noise, high power operation.
The AQ210's ultra-compact size makes it an ideal partner for AQ Series full-range loudspeakers where extra bass punch is required but installation space is limited.
More information...

The AQ6 is a two-way passive loudspeaker designed to fulfill the requirement for dynamic performance from a very small, architecturally friendly, vented enclosure. It features a 6.5" (165mm) direct radiating, long-throw bass driver and a 1" (25mm) doped fabric dome tweeter coupled to a 90° x 90° HF horn.
More information...

The AQ8 is a two-way passive loudspeaker designed to give excellent sonic performance from a compact and architecturally neutral, vented enclosure. It features an 8" (200mm) long-throw, direct radiating bass driver with a 2" (50mm) voice coil and a 1" (25mm) exit compression driver with a 1" (25mm) diaphragm, coupled to a constant directivity HF horn.
More information...

The Blackline F12+ is a high power, compact 2-way system with a 12” (300mm) LF driver and a 1” (25mm) exit compression driver mounted on a rotatable 80º x 50º constant directivity HF horn. It is the ideal choice for full-range applications calling for an efficient, reliable workhorse that is equally suitable for fixed installations and quick deployment mobile operations.
More information...

The Blackline F10+ is a versatile, 2-way passive system, designed to provide exceptional sound reinforcement and stage monitoring from a very compact enclosure. It features a powerful 10" (250mm) low frequency driver and a 1" (25mm) HF compression driver mounted on a constant directivity 90° x 50° horn. Depending on the application, the HF horn can be rotated to allow the multi-angle enclosure to be used in either its vertical or horizontal orientation.
More information...

The Blackline F8+ is a versatile, 2-way passive system designed for applications where high output is required from an ultra-compact enclosure. It features a long-excursion 8" (200mm) low frequency driver and a 1" (25mm) HF compression driver mounted on a constant directivity 90° x 50° horn. The horn is user rotatable to allow the F8’s multi-angle enclosure to be used in either its vertical or horizontal orientation, depending on the application.
More information...

The Blackline H2+ is an all-horn, very high performance mid/high pack for dance club and live music stages. It features an innovative Hybrid™ 10” (250mm) mid-range horn with a unique ‘phase-ball’ loading device. This maintains the 70º x 40º directivity pattern of the mid horn up to 2kHz where a 1” (25mm) exit HF compression driver takes over.
More information...

The S12 +is an extremely compact sub-bass system. It has been designed for use with the F8 and F10 full-range loudspeakers in situations where extended low frequency output and increased system headroom are required. When used with an F8 or F10, it will extend the response of the complete system to below 50Hz.
More information...

The elegant surface-mount C115 loudspeaker is ideal for reproducing both speech and background music in a distributed sound system. Its unobtrusive, lightweight polypropylene injection-moulded enclosure withstands most weather conditions and protects the weather-resistant drive unit in exposed locations.
More information...

The elegant surface-mount C115T loudspeaker is ideal for reproducing both speech and background music in a distributed sound system. Its unobtrusive, lightweight polypropylene injection-moulded enclosure withstands most weather conditions and protects the weather-resistant drive unit in exposed locations.

More information...

A powerful sub-bass complements the versatile Contractor Series. The ultra-compact sub provides extended low frequency, delivering acoustic warmth and impact in commercial environments where music is an important factor in creating the right image and atmosphere. Primary applications are retail stores, restaurants, hotels and audio visual suites.
More information...

The Martin W0.5 Wavefront system is a miniature high performance loudspeaker designed to suit a variety of applications - from foreground systems in restaurants and bars to live sound infills in concert situations.

It is a passive two-way system featuring an 8" (200mm) high power bass driver and a 1" (25mm) ferrofluid cooled compression driver on a 70º x 50º constant directivity horn. The drive units are housed in a rugged plywood enclosure built using the same techniques as larger Martin touring systems. Its two-way passive configuration simplifies operation, ensures predictable performance and reduces amplifier count.
More information...

The Martin W1 Wavefront system is a high performance, ultra-compact loudspeaker designed for specific applications where both high output capability and small size are required. Typical uses include audio-visual presentations and theatre sound. The W1 features a 10" (250mm) bass driver and 1" (25mm) exit compression driver housed in a rugged plywood enclosure built using the same construction techniques as larger Martin touring systems. Its 2-way passive configuration simplifies operation, ensures predictable system performance and reduces amplifier count.
More information...

The qualities of the Wavefront W2 have established its success as a powerful stand-alone system. This switchable active/passive two-way cabinet uses specialist high power drive units to achieve maximum SPL’s from a very compact enclosure.

It combines smooth, dynamic full frequency performance with exceptional articulation for a portable stand-alone system. Designed to meet the industry requirement for a 12" (300mm) driver plus horn configuration, Martin Audio’s version is more refined for superior, professional results.
More information...

The award-winning Wavefront W8C is lightweight and compact. It can be rigged quickly to deliver outstanding power and performance in smaller configurations than was previously possible with other loudspeakers. Audience experience is enhanced by true musicality, warmth and intelligibility - even at high SPL’s.

Ground-breaking three-way technology marries a low-mid horn-loaded 12" (300mm) cone drive unit with a unique combination of 6.5" (165mm) high-mid driver loaded by toroidal phase plug and horn plus a 1" (25mm) exit HF device, optimised for very high frequencies. The result - a remarkably clean, transparent sound, far lower distortion and increased overall output, without pushing any element to the limit.
More information...

The Martin Audio W8LC is a compact line array enclosure designed to bring superb next-generation line array performance to concert, theatre and commercial events. It meets the need for a high power, high bass impact system that is versatile and scalable for a very wide range of applications in the live sound, corporate and fixed installation fields. W8LC grids allow systems to be flown or ground stacked as required.

Though compact in size, the W8LC is a full-bandwidth system and may be used without subwoofers in many applications. Where additional low frequency extension is required, W8LCs may be complemented by the W8LS Line Array subwoofers, WLX horn and reflex loaded subwoofers or WSX horn loaded subwoofers.
More information...

The Martin Audio W8LM is a mini line array enclosure designed to bring line array performance benefits to a variety of small and medium scale applications. It meets the need for a versatile, scalable system that can be flown or ground stacked for corporate events, theatres and indoor venues. It is also suitable as a delay system for large scale outdoor sound reinforcement.

Following the constant directivity horn design philosophy of the W8L and the W8LC, the W8LM is a three-way system that combines line array principles with innovative horn loading techniques to produce a next generation, small line array with maximum dynamic impact.
More information...

The Martin Audio W8LMD is a mini, wide-dispersion vertically arrayable enclosure. It can be used individually and in small quantities for short to medium throw applications (up to 30 metres) as well as a downfill element for the W8LM. Its 20° vertical dispersion requires fewer cabinets to cover the same area as a conventional line array element, yet it still benefits from the smooth, predictable coverage of a vertically coupled system.
More information...

The ultra-compact WT15 is a trapezoid full-range speaker capable of producing SPL’s associated with much larger enclosures. It is designed specifically for theatre applications where minimum size is a priority.

Only 11" high, it produces extended bandwidth and has high output capability from twin 5" (125mm) drivers assembled in an innovative two-way configuration utilising ICT™ technology. To maximise output, the 5" (125mm) loudspeaker is augmented by a second 5" (125mm) driver operating in tandem over the bass and mid-range region. HF dispersion is identical in both horizontal and vertical planes.
More information...

The WT2 is a powerful, compact theatre system which can be used as a stand-alone enclosure in a distributed system or arrayed in multiples. The switchable active/passive two-way cabinet is very efficient, combining smooth dynamic full-frequency performance with excellent articulation, utilising high power drive units for maximum SPL.
More information...

Full-Range Speaker System Frequency Response 100 ~ 10,000Hz Black Finish, the TOA 677B is a 6W Wood wall mounting speaker. The product has a robust cone speaker, ideal for low level speech.

Full-Range Speaker System Frequency Response 100 ~ 10,000Hz Black Finish, the TOA 677B is a 6W Wood wall mounting speaker. The product has a robust cone speaker, ideal for low level speech.

Please note, picture is for illustration only and the box is white.

The MSP3 Powered Monitor Speaker is a 2-way powered monitor speaker system that delivers quality audio and excellent cost performance. Designed for use in personal music production systems, each unit features a built-in 20-watt amplifier that drives both the 10cm (4") cone and 2.2cm (7/8") tweeter. To facilitate connection with a veriety of audio sources, each monitor is equipped with a balanced XLR input, for direct compatibility with professional equipment, a balanced phone jack input and an unbalanced RCA jack input. The Yamaha MSP3 also features separate volume controls for the LINE 1 (RCA jack) input and LINE 2 (XLR/phone) input plus HIGH and LOW tone controls for sound tailoring.
More information...

High quality, powered monitors have traditionally demanded premium prices. The new MSP5 bi-amplified monitor speakers from Yamaha deliver extraordinary sound quality, at an equally attractive price! The MSP5 provides the perfect choice for a wide range of applications, from home recording to post production.

Ultra-compact enclosures allow easy placement. Small face print makes them very accurate for "point source" listening. Hookup is quick and easy with both XLR and 1/4 in. phone jacks available. 67 combined watts of audio power in a bi-amplified monitor this size, let alone near this price, was previously unheard of -- until now. Upgrading to studio level monitoring has never been easier.

More information...

The Yamaha S112V crossover networks are constructed with oversized coils, high voltage capacitors, and power resistors designed to provide the best possible sound quality and minimize loss. Overload protection is also included to protect the components.

The Yamaha S112V drivers are custom made by Eminence Speaker Corporation to Yamaha's exacting tolerances. The compression driver that generates the high frequency sound uses a pure titanium diaphragm. This 2" dome is one of the largest in its class, allowing for very high output and low distortion, without the aid of cooling fluids. It's mated to a 90 degrees x 40 degrees custom designed constant directivity horn with excellent dispersion and response.
More information...